How To Install LED Panel Lights

LED ceiling panels are a perfect alternative for the previous/traditional grid primarily based fluorescent luminaries. They have turn into more and more in style as a result of they offer a uniform and intensely harmonious lighting environment that can’t be provided by typical lamps. Your typical LED Ceiling panel is made using super bright LED gentle sources enabling consistent top quality lamp life with no IR or ceiling led panel light UV emissions.

LED ceiling panels are additionally well-liked as a result of they’re powered by low voltage current drivers. This makes them protected as well as vitality efficient. The truth that the current driver is fixed additionally helps to make the lamp lengthy lasting. The most common places you might be likely to search out the ceiling panel light panels embody; hospitals, schools, hallways and lobbies, assembly rooms, eating places and places of work.

Installation of led panel lights is an annoying job for many people, so we decided to stroll you through the installation process rapidly.

LED ceiling lights could possibly be put in in four ways – inbuilt, recessed, mounted or suspended. Built in and recessed set up provides a fashionable and sleeker look, albeit the latter provides extra subdued lighting. Mounted LED lights usually highlight the style of the fixture, whereas suspended installation is required for chandeliers and pendant lights.

First step (most vital) lots of you may not bear in mind of the LED technology so please undergo the consumer manual earlier than proceeding to put in the panel lights. That is to grasp the totally different parts used in the machine, which helps in the later stages of installation. You could handle them fastidiously as a result of they’re delicate in nature.

Now the second step is locating a suitable place for mounting the led panel lights. The perfect place to mount is an area which is closer to the facility socket, which in turn reduces the length of the wire. Then take a be aware of the dimensions of the panel so that you could drill holes where-ever required to mount the led panel.


1. Install the equipment to the panel lights (please contact our salesman for Specification, during which detailed set up steps are proven.)

2. Use screws to repair the 4 hanging cables onto the roof. Make sure that the four steel cables are adjusted so that the LED panel is horizontally aligned.


1. Fasten the clip on the place where the panel light is installed, such because the ceiling;

2. If you loved this post and you would want to receive much more information relating to ceiling panel light light panel – new content from, kindly visit our own page. Screw the other clip to the panel;

3. Screw the 2 clips using M4x8 screws.


1. Remove the normal grid lights;

2. Choose the alternative that fits precisely within the grid;

3. Recess the LED panel mild into the grid. (And, in case of falling down, we recommend that you use screws to fix the 4 hanging cables onto the roof, as suspending shows above).


1. Screw the brackets onto the panel in right place by four items of M4x8 countersunk head screws, and make sure they’re tight.

2. Drill a D6mm gap in the ceiling in accordance with the size of the bracket, ceiling light panel then put the bulge plug in. And at last, use the 4×30 countersunk head tapping screws to fasten the panel into the holes.

Spring clips

1. Put the spring onto the clip;

2. Screw the opposite aspect of clip onto panel gentle via ring.

3. And recess the panel into the opening within the ceiling.

Write a Reply or Comment